컨텐츠 바로가기

잔여예산 소진 초음파유화기 세일

Korea Process Technology

검색  

공급사 바로가기
Korea Process Technology KLR-1000, LAB REACTOR (Auto)

KLR-1000, LAB REACTOR (Auto)

(해외배송 가능상품)
기본 정보
상품명 KLR-1000, LAB REACTOR (Auto)
판매가 가격문의
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격

Notice

- 주문전 재고 여부 및 배송일정에 대한 상담을 진행해 주시기 바랍니다. 02-6264-5745
- Process QuestionNaire 를 작성해 주시면 최적의 제품을 추천해드리겠습니다. [다운로드]
- 독일 IKA 재고상품을 특별가격으로 구입하실 수 있습니다. [기획전 바로가기]

이벤트

제품상세정보

제품명 : KLR-1000, LAB REACTOR (Automatic)

Assembly and Operation Notes:

1. Assemble on a firm and flat workbench. Height of workbench depends on the condition. There should be some space (≥360cm) around the workbench considering the assembly and maintenance.

2. The transmission shaft is required to be vertical with the ground level. The nonperpendicularity (gradient) should not exceed 1/1000 height of the reactor.

3. The self-prepared accessories and safety valves on connecting pipes should be accordance to the requirement of reactor.

4. Check fastness of all the connecting components and driving parts after finishing assembly. Air tightness test of each connecting pipeline, nozzle, sealing component and the complete reactor should have no bubbling, overflow, seeping and leakage phenomenon.

5. Fill 46#mechine oil into reducer before starting up. Open the motor protection cover and rotate the fan blade by hand to check whether there is stucking or mixing shaft scraping reactor phenomenon. Clean up the reactor inside and start it up. Medium can be filled in for production if there is no abnormal noise and oscillation during a 30mins unload running. Change the reducer oil regularly


제품사양

Item Technical Parameters
Nominal volume 1L
Materia Reactor body: Glass(borosilicate), Stainless steel 304/ 316/ 316L, PTFE.
Design pressure -0.1~35MPa
Design temperature 350℃
Mixingspeed 0~1500r/min
Motor power 100W
Heating power 1000~1500W
Motor connecting Type Vertical drive or lateral pull
Heating type Electrical heating, electromagnetic heating, microwave heating, heat conduction oil heating, steam circulation heating
Opening ports on the reactor kettle Gas phase port with needle valve, liquid phase port with needle valve and dip pipe, solid feed inlet with plug, temperature measurement and control with platinum resistance, pressure gauge safety blasting with pressure gauge and safety explosion-proof device, reactor cooling coil inlet and outlet with tap.
Mixing type Paddle type, anchor type, impeller type, or choose other types according the reaction condition.
Mixing shaft Adopt self-lubricating wear-resisting bushings, suitable for various media agitation.
Seal type Magnetic seal, mechanical seal, packing seal
Discharging type Upward discharging or downward discharging
PlD Control box Temperature display and control, control accuracy±1℃; mixing speed display and stepless speed, heating power control and keep automatic constant temperature.
Other confiigurations Customized design and manufacture, according to different requirements on the kettle cover, reactor body, inner mixing paddles or add additional devices(Such as condensation reflux device, constant pressure feed tank, receiving device, condenser, etc.)
Stand type Automatic lifting

공식쇼핑몰 바로가기
한국코프로텍(주) 공식쇼핑몰 코프로몰에서
신용카드/계좌이체로 제품 구입이 가능합니다.

쇼핑몰바로가기